Linux-B
=======

ifconfig:
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.2.0.10  netmask 255.255.255.0  broadcast 10.2.0.255
        inet6 fe80::268a:7ff:fef7:5b00  prefixlen 64  scopeid 0x20<link>
        ether 24:8a:07:f7:5b:00  txqueuelen 1000  (Ethernet)
        RX packets 421072419  bytes 577114695801 (537.4 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 243181122  bytes 329309895927 (306.6 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp1s0d1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.41.41.2  netmask 255.255.255.0  broadcast 10.41.41.255
        inet6 fe80::268a:7ff:fef7:5b01  prefixlen 64  scopeid 0x20<link>
        ether 24:8a:07:f7:5b:01  txqueuelen 1000  (Ethernet)
        RX packets 991792  bytes 65490079 (62.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 19715801  bytes 29849298608 (27.7 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:22:4d:68:c9:d3  txqueuelen 1000  (Ethernet)
        RX packets 3214059  bytes 931034797 (887.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3199402  bytes 520488532 (496.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 18  memory 0xefb00000-efb20000

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1869404  bytes 215986624 (205.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1869404  bytes 215986624 (205.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vmbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.24.80.52  netmask 255.255.255.0  broadcast 10.24.80.255
        inet6 fe80::222:4dff:fe68:c9d3  prefixlen 64  scopeid 0x20<link>
        ether 00:22:4d:68:c9:d3  txqueuelen 1000  (Ethernet)
        RX packets 3100703  bytes 867566921 (827.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3199383  bytes 496835904 (473.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        
        
dmesg:
[    0.000000] Linux version 4.15.18-12-pve (build@pve) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.18-35 (Wed, 13 Mar 2019 08:24:42 +0100) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-12-pve root=/dev/mapper/pve-root ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db646fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db647000-0x00000000dd708fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd709000-0x00000000dd820fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dd821000-0x00000000dede1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dede2000-0x00000000dede2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dede3000-0x00000000dee25fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dee26000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: FUJITSU PRIMERGY RX100 S7p/D3034-B1, BIOS V4.6.5.3 R1.21.0 for D3034-B1x 12/18/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] total RAM covered: 8192M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 64K         num_reg: 5      lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fdd20-0x000fdd2f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 95000 size 24576
[    0.000000] BRK [0x28f44000, 0x28f44fff] PGTABLE
[    0.000000] BRK [0x28f45000, 0x28f45fff] PGTABLE
[    0.000000] BRK [0x28f46000, 0x28f46fff] PGTABLE
[    0.000000] BRK [0x28f47000, 0x28f47fff] PGTABLE
[    0.000000] BRK [0x28f48000, 0x28f48fff] PGTABLE
[    0.000000] BRK [0x28f49000, 0x28f49fff] PGTABLE
[    0.000000] BRK [0x28f4a000, 0x28f4afff] PGTABLE
[    0.000000] BRK [0x28f4b000, 0x28f4bfff] PGTABLE
[    0.000000] BRK [0x28f4c000, 0x28f4cfff] PGTABLE
[    0.000000] BRK [0x28f4d000, 0x28f4dfff] PGTABLE
[    0.000000] BRK [0x28f4e000, 0x28f4efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33a01000-0x35cf7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD810088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD81BB80 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DD8101B8 00B9C3 (v02 ALASKA A M I    00000009 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000DD81F080 000040
[    0.000000] ACPI: APIC 0x00000000DD81BC90 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD81BD08 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DD81BD50 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DD81BD90 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DD81BDC8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SPMI 0x00000000DD81C138 000040 (v05 A M I  OEMSPMI  00000000 AMI. 00000000)
[    0.000000] ACPI: SSDT 0x00000000DD81C178 0009A4 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DD81CB20 000A88 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DD81D5A8 000078 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 0x00000000DD81D620 000130 (v01 AMI    AMI EINJ 00000000      00000000)
[    0.000000] ACPI: ERST 0x00000000DD81D750 000210 (v01 AMIER  AMI ERST 00000000      00000000)
[    0.000000] ACPI: HEST 0x00000000DD81D960 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
[    0.000000] ACPI: BERT 0x00000000DD81DA08 000030 (v01 AMI    AMI BERT 00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21ffd1000-0x21fffbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000db646fff]
[    0.000000]   node   0: [mem 0x00000000dede2000-0x00000000dede2fff]
[    0.000000]   node   0: [mem 0x00000000dee26000-0x00000000df7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000] Reserved but unavailable: 16452 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[    0.000000] On node 0 totalpages: 2080700
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14017 pages used for memmap
[    0.000000]   DMA32 zone: 897058 pages, LIFO batch:31
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb647000-0xdd708fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd709000-0xdd820fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd821000-0xdede1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdede3000-0xdee25fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x511 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2048166
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-12-pve root=/dev/mapper/pve-root ro quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8060940K/8322800K available (12300K kernel code, 2480K rwdata, 4288K rodata, 2420K init, 2416K bss, 261860K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39766 entries in 156 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000dd6a0000 end: 0x000000dd6acfff
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3092.904 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.80 BogoMIPS (lpj=12371616)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028085] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028598] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028622] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028638] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028808] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028808] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028811] mce: CPU supports 9 MCE banks
[    0.028819] CPU0: Thermal monitoring enabled (TM1)
[    0.028828] process: using mwait in idle threads
[    0.028830] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.028831] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028832] Spectre V2 : Mitigation: Full generic retpoline
[    0.028832] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028833] Speculative Store Bypass: Vulnerable
[    0.028922] Freeing SMP alternatives memory: 36K
[    0.030060] TSC deadline timer enabled
[    0.030063] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.030123] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.030141] ... version:                3
[    0.030142] ... bit width:              48
[    0.030142] ... generic registers:      8
[    0.030143] ... value mask:             0000ffffffffffff
[    0.030143] ... max period:             00007fffffffffff
[    0.030144] ... fixed-purpose events:   3
[    0.030144] ... event mask:             00000007000000ff
[    0.030174] Hierarchical SRCU implementation.
[    0.030842] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.030855] smp: Bringing up secondary CPUs ...
[    0.030926] x86: Booting SMP configuration:
[    0.030927] .... node  #0, CPUs:      #1 #2 #3
[    0.034453] smp: Brought up 1 node, 4 CPUs
[    0.034453] smpboot: Max logical packages: 1
[    0.034453] smpboot: Total of 4 processors activated (24743.23 BogoMIPS)
[    0.036212] devtmpfs: initialized
[    0.036212] x86/mm: Memory block size: 128MB
[    0.036563] evm: security.selinux
[    0.036564] evm: security.SMACK64
[    0.036564] evm: security.SMACK64EXEC
[    0.036565] evm: security.SMACK64TRANSMUTE
[    0.036565] evm: security.SMACK64MMAP
[    0.036566] evm: security.apparmor
[    0.036566] evm: security.ima
[    0.036566] evm: security.capability
[    0.036577] PM: Registering ACPI NVS region [mem 0xdd709000-0xdd820fff] (1146880 bytes)
[    0.036577] PM: Registering ACPI NVS region [mem 0xdede3000-0xdee25fff] (274432 bytes)
[    0.036577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.036577] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.036577] pinctrl core: initialized pinctrl subsystem
[    0.036577] RTC time: 10:49:26, date: 07/02/20
[    0.036577] NET: Registered protocol family 16
[    0.036577] audit: initializing netlink subsys (disabled)
[    0.036577] audit: type=2000 audit(1593686966.036:1): state=initialized audit_enabled=0 res=1
[    0.036577] cpuidle: using governor ladder
[    0.036577] cpuidle: using governor menu
[    0.036577] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.036577] ACPI: bus type PCI registered
[    0.036577] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.036577] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.036577] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.036577] PCI: Using configuration type 1 for base access
[    0.036577] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.037022] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.037022] ACPI: Added _OSI(Module Device)
[    0.037022] ACPI: Added _OSI(Processor Device)
[    0.037022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.037022] ACPI: Added _OSI(Processor Aggregator Device)
[    0.037022] ACPI: Added _OSI(Linux-Dell-Video)
[    0.037022] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.037022] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.037022] ACPI: Executed 1 blocks of module-level executable AML code
[    0.049991] ACPI: Dynamic OEM Table Load:
[    0.049998] ACPI: SSDT 0xFFFF9FC055CEC000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.050135] ACPI: Dynamic OEM Table Load:
[    0.050135] ACPI: SSDT 0xFFFF9FC055F38000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.050135] ACPI: Dynamic OEM Table Load:
[    0.050135] ACPI: SSDT 0xFFFF9FC055E86800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.050135] ACPI: Interpreter enabled
[    0.050135] ACPI: (supports S0 S4 S5)
[    0.050135] ACPI: Using IOAPIC for interrupt routing
[    0.050135] HEST: Table parsing has been initialized.
[    0.050135] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.050135] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.058135] ACPI: Power Resource [FN00] (off)
[    0.058217] ACPI: Power Resource [FN01] (off)
[    0.058295] ACPI: Power Resource [FN02] (off)
[    0.058374] ACPI: Power Resource [FN03] (off)
[    0.058452] ACPI: Power Resource [FN04] (off)
[    0.059094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.059099] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.059395] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.059583] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.059584] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.060113] PCI host bridge to bus 0000:00
[    0.060115] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.060116] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.060117] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.060119] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.060120] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.060121] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.060122] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.060123] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.060124] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.060125] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.060126] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.060134] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
[    0.060219] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.060249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.060348] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.060368] pci 0000:00:19.0: reg 0x10: [mem 0xefd00000-0xefd1ffff]
[    0.060376] pci 0000:00:19.0: reg 0x14: [mem 0xefd25000-0xefd25fff]
[    0.060384] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[    0.060441] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.060515] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.060536] pci 0000:00:1a.0: reg 0x10: [mem 0xefd24000-0xefd243ff]
[    0.060616] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.060692] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.060773] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.060859] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.060938] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.061018] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.061097] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.061180] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.061201] pci 0000:00:1d.0: reg 0x10: [mem 0xefd23000-0xefd233ff]
[    0.061281] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.061353] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.061465] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
[    0.061634] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.061652] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[    0.061658] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[    0.061665] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[    0.061673] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[    0.061680] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.061688] pci 0000:00:1f.2: reg 0x24: [mem 0xefd22000-0xefd227ff]
[    0.061726] pci 0000:00:1f.2: PME# supported from D3hot
[    0.061794] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.061813] pci 0000:00:1f.3: reg 0x10: [mem 0xefd21000-0xefd210ff 64bit]
[    0.061832] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.062172] pci 0000:01:00.0: [15b3:1003] type 00 class 0x020000
[    0.062704] pci 0000:01:00.0: reg 0x10: [mem 0xefa00000-0xefafffff 64bit]
[    0.062960] pci 0000:01:00.0: reg 0x18: [mem 0xed800000-0xedffffff 64bit pref]
[    0.063437] pci 0000:01:00.0: reg 0x30: [mem 0xef900000-0xef9fffff pref]
[    0.076176] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.076178] pci 0000:00:01.0:   bridge window [mem 0xef900000-0xefafffff]
[    0.076181] pci 0000:00:01.0:   bridge window [mem 0xed800000-0xedffffff 64bit pref]
[    0.076244] pci 0000:02:00.0: [1000:0073] type 00 class 0x010400
[    0.076273] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.076291] pci 0000:02:00.0: reg 0x14: [mem 0xefc60000-0xefc63fff 64bit]
[    0.076309] pci 0000:02:00.0: reg 0x1c: [mem 0xefc00000-0xefc3ffff 64bit]
[    0.076332] pci 0000:02:00.0: reg 0x30: [mem 0xefc40000-0xefc5ffff pref]
[    0.076342] pci 0000:02:00.0: enabling Extended Tags
[    0.076423] pci 0000:02:00.0: supports D1 D2
[    0.088025] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.088031] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.088045] pci 0000:00:1c.0:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.088132] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
[    0.088189] pci 0000:03:00.0: reg 0x10: [mem 0xefb00000-0xefb1ffff]
[    0.088235] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd01f]
[    0.088258] pci 0000:03:00.0: reg 0x1c: [mem 0xefb20000-0xefb23fff]
[    0.088486] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.100043] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.100047] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.100050] pci 0000:00:1c.6:   bridge window [mem 0xefb00000-0xefbfffff]
[    0.100128] pci 0000:04:00.0: [102b:0522] type 00 class 0x030000
[    0.100174] pci 0000:04:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[    0.100193] pci 0000:04:00.0: reg 0x14: [mem 0xef800000-0xef803fff]
[    0.100212] pci 0000:04:00.0: reg 0x18: [mem 0xef000000-0xef7fffff]
[    0.112026] pci 0000:00:1c.7: PCI bridge to [bus 04]
[    0.112035] pci 0000:00:1c.7:   bridge window [mem 0xee000000-0xef8fffff]
[    0.112108] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.112116] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.112117] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.112119] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.112120] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.112121] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.112122] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.112123] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.112124] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.112125] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.112126] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.112732] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.112797] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.112862] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.112925] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.112989] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.113052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.113116] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.113179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.113631] SCSI subsystem initialized
[    0.113642] libata version 3.00 loaded.
[    0.113642] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.113642] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.113642] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.113642] vgaarb: loaded
[    0.113642] ACPI: bus type USB registered
[    0.113642] usbcore: registered new interface driver usbfs
[    0.113642] usbcore: registered new interface driver hub
[    0.113642] usbcore: registered new device driver usb
[    0.113642] EDAC MC: Ver: 3.0.0
[    0.113642] PCI: Using ACPI for IRQ routing
[    0.117966] PCI: pci_cache_line_size set to 64 bytes
[    0.118043] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.118044] e820: reserve RAM buffer [mem 0xdb647000-0xdbffffff]
[    0.118045] e820: reserve RAM buffer [mem 0xdede3000-0xdfffffff]
[    0.118046] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.118120] NetLabel: Initializing
[    0.118121] NetLabel:  domain hash size = 128
[    0.118121] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.118133] NetLabel:  unlabeled traffic allowed by default
[    0.118144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.118144] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.120013] clocksource: Switched to clocksource hpet
[    0.128203] VFS: Disk quotas dquot_6.6.0
[    0.128215] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.128294] AppArmor: AppArmor Filesystem Enabled
[    0.128318] pnp: PnP ACPI init
[    0.128422] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.128426] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.128509] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.128511] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.128512] system 00:01: [io  0xffff] has been reserved
[    0.128513] system 00:01: [io  0xffff] has been reserved
[    0.128514] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.128516] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.128517] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.128518] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.128521] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128542] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.128588] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.128591] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.128744] pnp 00:04: [dma 0 disabled]
[    0.128785] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.128833] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.128836] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129107] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.129109] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.129110] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.129111] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.129113] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.129114] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.129115] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.129117] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.129118] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.129119] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.129120] system 00:06: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.129124] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129305] pnp: PnP ACPI: found 7 devices
[    0.135263] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.135299] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.135302] pci 0000:00:01.0:   bridge window [mem 0xef900000-0xefafffff]
[    0.135304] pci 0000:00:01.0:   bridge window [mem 0xed800000-0xedffffff 64bit pref]
[    0.135307] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.135310] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.135314] pci 0000:00:1c.0:   bridge window [mem 0xefc00000-0xefcfffff]
[    0.135322] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.135324] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.135329] pci 0000:00:1c.6:   bridge window [mem 0xefb00000-0xefbfffff]
[    0.135337] pci 0000:00:1c.7: PCI bridge to [bus 04]
[    0.135341] pci 0000:00:1c.7:   bridge window [mem 0xee000000-0xef8fffff]
[    0.135349] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.135359] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.135361] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.135362] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.135363] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.135364] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.135365] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.135366] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.135368] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.135369] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.135370] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.135371] pci_bus 0000:01: resource 1 [mem 0xef900000-0xefafffff]
[    0.135372] pci_bus 0000:01: resource 2 [mem 0xed800000-0xedffffff 64bit pref]
[    0.135373] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.135374] pci_bus 0000:02: resource 1 [mem 0xefc00000-0xefcfffff]
[    0.135376] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.135377] pci_bus 0000:03: resource 1 [mem 0xefb00000-0xefbfffff]
[    0.135378] pci_bus 0000:04: resource 1 [mem 0xee000000-0xef8fffff]
[    0.135379] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.135380] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.135381] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.135383] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.135384] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.135385] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.135386] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.135387] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.135388] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.135389] pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.135473] NET: Registered protocol family 2
[    0.135613] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.135705] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.135811] TCP: Hash tables configured (established 65536 bind 65536)
[    0.135834] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.135853] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.135891] NET: Registered protocol family 1
[    0.184134] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.184148] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.184178] Unpacking initramfs...
[    0.623303] Freeing initrd memory: 35804K
[    0.623341] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.623344] software IO TLB [mem 0xd7647000-0xdb647000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.623541] Scanning for low memory corruption every 60 seconds
[    0.624085] Initialise system trusted keyrings
[    0.624093] Key type blacklist registered
[    0.624123] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.624957] zbud: loaded
[    0.625349] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.625445] fuse init (API version 7.26)
[    0.626601] Key type asymmetric registered
[    0.626602] Asymmetric key parser 'x509' registered
[    0.626628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.626658] io scheduler noop registered
[    0.626658] io scheduler deadline registered (default)
[    0.626678] io scheduler cfq registered
[    0.627291] intel_idle: MWAIT substates: 0x1120
[    0.627292] intel_idle: v0.4.1 model 0x3A
[    0.627391] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.627462] ACPI: AC Adapter [PSD] (on-line)
[    0.627505] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.627513] ACPI: Power Button [PWRB]
[    0.627539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.627560] ACPI: Power Button [PWRF]
[    0.628244] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.628396] thermal LNXTHERM:00: registered as thermal_zone0
[    0.628397] ACPI: Thermal Zone [TZ00] (28 C)
[    0.628663] thermal LNXTHERM:01: registered as thermal_zone1
[    0.628664] ACPI: Thermal Zone [TZ01] (30 C)
[    0.628714] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.628715] pstore: using zlib compression
[    0.628716] pstore: Registered erst as persistent store backend
[    0.628777] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[    0.628870] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.649687] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.651328] Linux agpgart interface v0.103
[    0.652478] loop: module loaded
[    0.652668] libphy: Fixed MDIO Bus: probed
[    0.652669] tun: Universal TUN/TAP device driver, 1.6
[    0.652693] PPP generic driver version 2.4.2
[    0.652723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.652725] ehci-pci: EHCI PCI platform driver
[    0.652814] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.652819] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.652830] ehci-pci 0000:00:1a.0: debug port 2
[    0.656735] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.656747] ehci-pci 0000:00:1a.0: irq 16, io mem 0xefd24000
[    0.672016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.672056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.672057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.672058] usb usb1: Product: EHCI Host Controller
[    0.672059] usb usb1: Manufacturer: Linux 4.15.18-12-pve ehci_hcd
[    0.672060] usb usb1: SerialNumber: 0000:00:1a.0
[    0.672200] hub 1-0:1.0: USB hub found
[    0.672207] hub 1-0:1.0: 2 ports detected
[    0.672409] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.672413] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.672423] ehci-pci 0000:00:1d.0: debug port 2
[    0.676327] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.676337] ehci-pci 0000:00:1d.0: irq 23, io mem 0xefd23000
[    0.692052] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.692083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.692084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.692085] usb usb2: Product: EHCI Host Controller
[    0.692086] usb usb2: Manufacturer: Linux 4.15.18-12-pve ehci_hcd
[    0.692087] usb usb2: SerialNumber: 0000:00:1d.0
[    0.692231] hub 2-0:1.0: USB hub found
[    0.692237] hub 2-0:1.0: 2 ports detected
[    0.692355] ehci-platform: EHCI generic platform driver
[    0.692362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.692365] ohci-pci: OHCI PCI platform driver
[    0.692370] ohci-platform: OHCI generic platform driver
[    0.692375] uhci_hcd: USB Universal Host Controller Interface driver
[    0.692406] i8042: PNP: No PS/2 controller found.
[    0.692569] mousedev: PS/2 mouse device common for all mice
[    0.692830] rtc_cmos 00:02: RTC can wake from S4
[    0.692947] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.692974] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.692980] i2c /dev entries driver
[    0.692983] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.693024] device-mapper: uevent: version 1.0.3
[    0.693072] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.693076] intel_pstate: Intel P-state driver initializing
[    0.693345] ledtrig-cpu: registered to indicate activity on CPUs
[    0.693685] NET: Registered protocol family 10
[    0.696294] Segment Routing with IPv6
[    0.696315] NET: Registered protocol family 17
[    0.696324] Bridge firewalling registered
[    0.696368] Key type dns_resolver registered
[    0.696619] RAS: Correctable Errors collector initialized.
[    0.696640] microcode: sig=0x306a9, pf=0x2, revision=0x15
[    0.696712] microcode: Microcode Update Driver: v2.2.
[    0.696718] sched_clock: Marking stable (696709650, 0)->(675432589, 21277061)
[    0.696895] registered taskstats version 1
[    0.696900] Loading compiled-in X.509 certificates
[    0.696911] zswap: loaded using pool lzo/zbud
[    0.698689] Key type big_key registered
[    0.698691] Key type trusted registered
[    0.699619] Key type encrypted registered
[    0.699621] AppArmor: AppArmor sha1 policy hashing enabled
[    0.699623] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.699626] ima: Allocated hash algorithm: sha1
[    0.699641] evm: HMAC attrs: 0x1
[    0.700052]   Magic number: 12:3:830
[    0.700152] rtc_cmos 00:02: setting system clock to 2020-07-02 10:49:26 UTC (1593686966)
[    0.700242] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.700242] EDD information not available.
[    0.701782] Freeing unused kernel memory: 2420K
[    0.724038] Write protecting the kernel read-only data: 20480k
[    0.724512] Freeing unused kernel memory: 2008K
[    0.727594] Freeing unused kernel memory: 1856K
[    0.733209] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.733209] x86/mm: Checking user space page tables
[    0.738775] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.748701] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.748764] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.748772] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.775637] pps_core: LinuxPPS API ver. 1 registered
[    0.775638] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.776214] PTP clock support registered
[    0.776329] e1000e: loading out-of-tree module taints kernel.
[    0.776629] megasas: 07.703.05.00-rc1
[    0.776987] megaraid_sas 0000:02:00.0: FW now in Ready state
[    0.776989] megaraid_sas 0000:02:00.0: 32 bit DMA mask and 32 bit consistent mask
[    0.777083] megaraid_sas 0000:02:00.0: firmware supports msix        : (0)
[    0.777084] megaraid_sas 0000:02:00.0: current msix/online cpus      : (1/4)
[    0.777085] megaraid_sas 0000:02:00.0: RDPQ mode     : (disabled)
[    0.777100] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.1.1-NAPI
[    0.777100] e1000e: Copyright(c) 1999 - 2018 Intel Corporation.
[    0.777239] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.778801] mlx4_core: Mellanox ConnectX core driver v4.0-0
[    0.778808] mlx4_core: Initializing 0000:01:00.0
[    0.860026] megaraid_sas 0000:02:00.0: controller type       : iMR(0MB)
[    0.860027] megaraid_sas 0000:02:00.0: Online Controller Reset(OCR)  : Enabled
[    0.860028] megaraid_sas 0000:02:00.0: Secure JBOD support   : No
[    0.860031] megaraid_sas 0000:02:00.0: megasas_init_mfi: fw_support_ieee=67108864
[    0.860048] megaraid_sas 0000:02:00.0: INIT adapter done
[    0.860050] megaraid_sas 0000:02:00.0: Jbod map is not supported megasas_setup_jbod_map 5108
[    0.916052] megaraid_sas 0000:02:00.0: pci id                : (0x1000)/(0x0073)/(0x1734)/(0x1177)
[    0.916063] megaraid_sas 0000:02:00.0: unevenspan support    : no
[    0.916063] megaraid_sas 0000:02:00.0: firmware crash dump   : no
[    0.916064] megaraid_sas 0000:02:00.0: jbod sync map         : no
[    0.916066] scsi host0: Avago SAS based MegaRAID driver
[    0.920432] scsi 0:2:0:0: Direct-Access     LSI      RAID SAS 6G 0/1  2.13 PQ: 0 ANSI: 5
[    0.925721] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    0.927996] sd 0:2:0:0: Attached scsi generic sg0 type 0
[    0.928170] sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/279 GiB)
[    0.928171] sd 0:2:0:0: [sda] 4096-byte physical blocks
[    0.928288] sd 0:2:0:0: [sda] Write Protect is off
[    0.928290] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
[    0.928345] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
[    0.964741]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    0.965677] sd 0:2:0:0: [sda] Attached SCSI disk
[    1.008376] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.028043] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.043110] random: fast init done
[    1.048055] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:68:c9:d4
[    1.048056] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.048111] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 313130-031
[    1.048415] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.048465] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.049054] ahci 0000:00:1f.2: version 3.0
[    1.059330] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.059332] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.106866] e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
[    1.116558] scsi host1: ahci
[    1.116736] scsi host2: ahci
[    1.116922] scsi host3: ahci
[    1.117021] scsi host4: ahci
[    1.117129] scsi host5: ahci
[    1.117191] scsi host6: ahci
[    1.117219] ata1: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22100 irq 30
[    1.117221] ata2: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22180 irq 30
[    1.117223] ata3: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22200 irq 30
[    1.117225] ata4: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22280 irq 30
[    1.117227] ata5: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22300 irq 30
[    1.117229] ata6: SATA max UDMA/133 abar m2048@0xefd22000 port 0xefd22380 irq 30
[    1.164318] e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:22:4d:68:c9:d3
[    1.164320] e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    1.164401] e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: 313130-033
[    1.164560] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.164562] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.164908] hub 1-1:1.0: USB hub found
[    1.165043] hub 1-1:1.0: 6 ports detected
[    1.165178] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.180243] e1000e 0000:03:00.0 enp3s0: renamed from eth1
[    1.184438] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.184439] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.184725] hub 2-1:1.0: USB hub found
[    1.184812] hub 2-1:1.0: 6 ports detected
[    1.430862] ata6: SATA link down (SStatus 0 SControl 300)
[    1.430894] ata3: SATA link down (SStatus 0 SControl 300)
[    1.430914] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.430930] ata1: SATA link down (SStatus 0 SControl 300)
[    1.430947] ata2: SATA link down (SStatus 0 SControl 300)
[    1.430984] ata4: SATA link down (SStatus 0 SControl 300)
[    1.435227] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.435231] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.435234] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.438456] ata5.00: ATAPI: HL-DT-ST DVDRAM GT80N, SF02, max UDMA/133
[    1.442322] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.442326] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.442329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.445507] ata5.00: configured for UDMA/133
[    1.448289] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT80N     SF02 PQ: 0 ANSI: 5
[    1.507666] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.507667] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.507838] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.507954] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    1.628061] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.628071] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
[    2.652240] clocksource: Switched to clocksource tsc
[    7.661671] mlx4_core 0000:01:00.0: DMFS high rate steer mode is: disabled performance optimized steering
[    7.662014] mlx4_core 0000:01:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s
[    7.662015] mlx4_core 0000:01:00.0: PCIe link width is x8, device supports x8
[    7.692592] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[    7.692691] mlx4_en 0000:01:00.0: Activating port:1
[    7.694959] mlx4_en: 0000:01:00.0: Port 1: Using 4 TX rings
[    7.694960] mlx4_en: 0000:01:00.0: Port 1: Using 4 RX rings
[    7.695184] mlx4_en: 0000:01:00.0: Port 1: Initializing port
[    7.695618] mlx4_en 0000:01:00.0: registered PHC clock
[    7.695752] mlx4_en 0000:01:00.0: Activating port:2
[    7.695894] mlx4_en: 0000:01:00.0: Port 2: Using 4 TX rings
[    7.695895] mlx4_en: 0000:01:00.0: Port 2: Using 4 RX rings
[    7.696084] mlx4_en: 0000:01:00.0: Port 2: Initializing port
[    7.697177] mlx4_core 0000:01:00.0 enp1s0: renamed from eth0
[    7.712291] mlx4_core 0000:01:00.0 enp1s0d1: renamed from eth1
[    8.036025] raid6: sse2x1   gen()  9240 MB/s
[    8.084036] raid6: sse2x1   xor()  7387 MB/s
[    8.132034] raid6: sse2x2   gen() 11432 MB/s
[    8.180025] raid6: sse2x2   xor()  8058 MB/s
[    8.228036] raid6: sse2x4   gen() 13437 MB/s
[    8.276025] raid6: sse2x4   xor() 10073 MB/s
[    8.276026] raid6: using algorithm sse2x4 gen() 13437 MB/s
[    8.276026] raid6: .... xor() 10073 MB/s, rmw enabled
[    8.276035] raid6: using ssse3x2 recovery algorithm
[    8.276475] xor: automatically using best checksumming function   avx
[    8.281681] Btrfs loaded, crc32c=crc32c-intel
[    8.703024] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    9.267343] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.312149] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.332155] systemd[1]: Detected architecture x86-64.
[    9.338763] systemd[1]: Set hostname to <px2>.
[   10.447965] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.447997] systemd[1]: Reached target ceph target allowing to start/stop all ceph-osd@.service instances at once.
[   10.448046] systemd[1]: Listening on Journal Socket.
[   10.448077] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.448101] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.448110] systemd[1]: Reached target ceph target allowing to start/stop all ceph-fuse@.service instances at once.
[   10.448140] systemd[1]: Listening on udev Control Socket.
[   10.563032] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   10.595855] RPC: Registered named UNIX socket transport module.
[   10.595856] RPC: Registered udp transport module.
[   10.595856] RPC: Registered tcp transport module.
[   10.595856] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.611209] systemd-journald[323]: Received request to flush runtime journal from PID 1
[   10.613071] Loading iSCSI transport class v2.0-870.
[   10.653224] iscsi: registered transport (tcp)
[   10.762094] iscsi: registered transport (iser)
[   10.858791] SPL: Loaded module v0.7.13-1
[   10.860518] znvpair: module license 'CDDL' taints kernel.
[   10.860519] Disabling lock debugging due to kernel taint
[   11.587913] ipmi message handler version 39.2
[   11.595104] ipmi device interface
[   11.599651] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   11.616083] power_meter ACPI000D:00: Found ACPI power meter.
[   11.616106] power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   11.624630] IPMI System Interface driver.
[   11.624638] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[   11.624640] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[   11.624640] ipmi_si: Adding SMBIOS-specified kcs state machine
[   11.624659] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[   11.624675] ipmi_si IPI0001:00: [io  0x0ca2] regsize 1 spacing 1 irq 0
[   11.624676] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[   11.624677] ipmi_si: Adding ACPI-specified kcs state machine
[   11.624694] ipmi_platform: probing via SPMI
[   11.624695] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[   11.624696] (NULL device *): SPMI-specified kcs state machine: duplicate
[   11.624709] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[   11.671675] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
[   11.686099] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.688834] Error: Driver 'pcspkr' is already registered, aborting...
[   11.696557] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   11.696561] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.696564] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   11.696567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.696568] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   11.696570] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.696571] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   11.696574] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000518-0x0000000000000518 (\_SI.LEDI) (20170831/utaddress-247)
[   11.696576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.696577] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.033687] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002880, prod_id: 0x0310, dev_id: 0x03)
[   12.039353] ipmi_si IPI0001:00: IPMI kcs interface initialized
[   12.040344] random: crng init done
[   12.040345] random: 7 urandom warning(s) missed due to ratelimiting
[   12.313432] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   12.313433] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   12.313434] RAPL PMU: hw unit of domain package 2^-16 Joules
[   12.313434] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   12.325946] IPMI SSIF Interface driver
[   12.389123] [TTM] Zone  kernel: Available graphics memory: 4051532 kiB
[   12.389125] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   12.389125] [TTM] Initializing pool allocator
[   12.389128] [TTM] Initializing DMA pool allocator
[   12.428750] Adding 6422524k swap on /dev/mapper/pve-swap.  Priority:-2 extents:1 across:6422524k FS
[   12.465317] fbcon: mgadrmfb (fb0) is primary device
[   12.493307] AVX version of gcm_enc/dec engaged.
[   12.493307] AES CTR mode by8 optimization enabled
[   12.531031] ZFS: Loaded module v0.7.13-pve1~bpo1, ZFS pool version 5000, ZFS filesystem version 5
[   12.563107] intel_rapl: Found RAPL domain package
[   12.563107] intel_rapl: Found RAPL domain core
[   12.563111] intel_rapl: RAPL package 0 domain package locked by BIOS
[   12.773318] Console: switching to colour frame buffer device 160x64
[   12.810564] mgag200 0000:04:00.0: fb0: mgadrmfb frame buffer device
[   12.856066] [drm] Initialized mgag200 1.0.0 20110418 for 0000:04:00.0 on minor 0
[   13.247634] device-mapper: thin: Data device (dm-3) discard unsupported: Disabling discard passdown.
[   13.837240] Netfilter messages via NETLINK v0.30.
[   14.091843] audit: type=1400 audit(1593686979.884:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=917 comm="apparmor_parser"
[   14.129972] audit: type=1400 audit(1593686979.924:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=916 comm="apparmor_parser"
[   14.129975] audit: type=1400 audit(1593686979.924:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=916 comm="apparmor_parser"
[   14.129977] audit: type=1400 audit(1593686979.924:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=916 comm="apparmor_parser"
[   14.129978] audit: type=1400 audit(1593686979.924:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=916 comm="apparmor_parser"
[   14.175499] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   14.474113] new mount options do not match the existing superblock, will be ignored
[   14.728351] vmbr0: port 1(enp3s0) entered blocking state
[   14.728353] vmbr0: port 1(enp3s0) entered disabled state
[   14.728400] device enp3s0 entered promiscuous mode
[   14.810133] IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
[   15.330376] audit: type=1400 audit(1593686981.124:7): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1381 comm="apparmor_parser"
[   15.336494] audit: type=1400 audit(1593686981.132:8): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1389 comm="apparmor_parser"
[   15.336497] audit: type=1400 audit(1593686981.132:9): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1389 comm="apparmor_parser"
[   15.336499] audit: type=1400 audit(1593686981.132:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1389 comm="apparmor_parser"
[   15.336500] audit: type=1400 audit(1593686981.132:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1389 comm="apparmor_parser"
[   17.561141] e1000e: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None



root@px2:~# lspci -vvvv
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller (rev 09)
        Subsystem: Fujitsu Technology Solutions Xeon E3-1200 v2/Ivy Bridge DRAM Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: ie31200_edac
        Kernel modules: ie31200_edac

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: ef900000-efafffff
        Prefetchable memory behind bridge: 00000000ed800000-00000000edffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Fujitsu Technology Solutions Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: fee00218  Data: 0000
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us
                        ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [140 v1] Root Complex Link
                Desc:   PortNumber=02 ComponentID=01 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
                        Addr:   00000000fed19000
        Capabilities: [d94 v1] #19
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
        Subsystem: Fujitsu Technology Solutions 82579LM Gigabit Network Connection (Lewisville)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 26
        Region 0: Memory at efd00000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at efd25000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at f040 [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee002b8  Data: 0000
        Capabilities: [e0] PCI Advanced Features
                AFCap: TP+ FLR-
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: e1000e
        Kernel modules: e1000e

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at efd24000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci-pci

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: efc00000-efcfffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family PCI Express Root Port 1
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: efb00000-efbfffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #7, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family PCI Express Root Port 7
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 19
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: ee000000-ef8fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family PCI Express Root Port 8
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at efd23000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Fujitsu Technology Solutions 82801 PCI Bridge

00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04)
        Subsystem: Fujitsu Technology Solutions C202 Chipset LPC Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 30
        Region 0: I/O ports at f090 [size=8]
        Region 1: I/O ports at f080 [size=4]
        Region 2: I/O ports at f070 [size=8]
        Region 3: I/O ports at f060 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at efd22000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00338  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Capabilities: [b0] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Fujitsu Technology Solutions 6 Series/C200 Series Chipset Family SMBus Controller
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at efd21000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f000 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
        Subsystem: Mellanox Technologies MT27500 Family [ConnectX-3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at efa00000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at ed800000 (64-bit, prefetchable) [size=8M]
        Expansion ROM at ef900000 [disabled] [size=1M]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data
                Product Name: CX312A - ConnectX-3 SFP+
                Read-only fields:
                        [PN] Part number: MCX312A-XCBT
                        [EC] Engineering changes: AD
                        [SN] Serial number: MT1702X03186
                        [V0] Vendor specific: PCIe Gen3 x8
                        [RV] Reserved: checksum good, 0 byte(s) reserved
                Read/write fields:
                        [V1] Vendor specific: N/A
                        [YA] Asset tag: N/A
                        [RW] Read-write area: 105 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 253 byte(s) free
                        [RW] Read-write area: 252 byte(s) free
                End
        Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
                Vector table: BAR=0 offset=0007c000
                PBA: BAR=0 offset=0007d000
        Capabilities: [60] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 116.000W
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [c0] Vendor Specific Information: Len=18 <?>
        Capabilities: [100 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 0
                ARICtl: MFVC- ACS-, Function Group: 0
        Capabilities: [148 v1] Device Serial Number 24-8a-07-03-00-f7-5b-00
        Capabilities: [154 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [18c v1] #19
        Kernel driver in use: mlx4_core
        Kernel modules: mlx4_core

02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03)
        Subsystem: Fujitsu Technology Solutions RAID Ctrl SAS 6G 0/1 (D2607)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at e000 [size=256]
        Region 1: Memory at efc60000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at efc00000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at efc40000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [c0] MSI-X: Enable+ Count=15 Masked-
                Vector table: BAR=1 offset=00002000
                PBA: BAR=1 offset=00003800
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [138 v1] Power Budgeting <?>
        Kernel driver in use: megaraid_sas
        Kernel modules: megaraid_sas

03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
        Subsystem: Fujitsu Technology Solutions 82574L Gigabit Network Connection
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at efb00000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at d000 [size=32]
        Region 3: Memory at efb20000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number 00-22-4d-ff-ff-68-c9-d3
        Kernel driver in use: e1000e
        Kernel modules: e1000e

04:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) (rev 05) (prog-if 00 [VGA controller])
        Subsystem: Fujitsu Technology Solutions MGA G200e [Pilot] ServerEngines (SEP1)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at ef800000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=8M]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Kernel driver in use: mgag200
        Kernel modules: mgag200